Fill Details

Get free expert guidance within 24 Hours

Automated Greenhouse Monitoring & Controlling App Design using Android and IOT

  • 30% Off
    Project Pack with
    Online / Onsite Training Program

    488
    What you will get
  • 30% Off
    Do it Yourself
    Self Learning Pac

    526
    What you will get
Project Description

Green house effect is a phenomenon in which the atmosphere of a planet traps radiation emitted by its sun,caused by gases such as carbon dioxide, water vapor, and methane that allow incomingsunlight to pass through but retain heat radiated back from the planet's surface. The main motive of this teleremote and telemetry based project is to detect and check the temperature of the green house effect, if the temperature is increased it should give an indication that the temperature has rise. For this purpose temperature sensors are used that will monitor the temperature and will check whether the temperature is low or high , an critical temperature value is set which is used for checking the temperature of green house. A coolant is also provided that will cool down the green house on increase in temperature. The GPRS is also used which will send the data to the internet, where the record is kept for future use. The communication between GPRS and internet is done through Internet of things (IoT).

Modules Used
CU05_img
Microcontroller ATmega8
HMI6_img
Buzzer for Beep Source
HMI3_img
Display Unit (Liquid Crystal Display)
SDU1_img
Relay Driver (Auto Electro Switching) using Optoco
IOTH1_img
Internet Of Things (Hardware Module)
MOD9_img
GPRS Modem
PS01_img
Regulated Power Supply
SN01_img
Temperature Sensor (LM-35)
IOT_Telemetry_img
Internet Of Things (Telemetry)
IOT_Teleremote_img
Internet Of Things (Teleremote)
Related Training Modules
  • img
    Very Large Scale Integration (VLSI)

    This is a process of stemming or creating integrated circuits by combing several thousands of transistors together on a single chip. VLSI stands for very large scale integration which in short has a purpose of integrating several numbers of semiconductors on a single chip. There are various VLSI technologies used as 45nm, 65nm. They have been named so depending on the length of the gate used in the transistors. A microprocessor is also a VLSI device. Structured VLSI design is a modular methodology originated just with an aim of saving microchip area by minimizing the interconnection area.

    Read More
  • img
    VLSI using CPLD and FPGA

    This is a process of stemming or creating integrated circuits by combing several thousands of transistors together on a single chip. VLSI stands for very large scale integration which in short has a purpose of integrating several numbers of semiconductors on a single chip. There are various VLSI technologies used as 45nm, 65nm. They have been named so depending on the length of the gate used in the transistors. A microprocessor is also a VLSI device. Structured VLSI design is a modular methodology originated just with an aim of saving microchip area by minimizing the interconnection area.

    Read More
  • img
    PHP Web Development

    PHP is a scripting Language which is used to develop websites.

    Read More
  • img
    Embedded System using ARDUINO

    Embedded system is basically a combination of hardware with software. Embedded system basically is a computer system that is designed to pull off a few or one specific function, more often than not in real-time computing constraints. “ARDUNIO” most widely used technique of embedded systems. An Arduino is an assembled board of Atmel 8-bit AVR microcontroller with additional components to facilitate programming. An important aspect of the Arduino is the standardized way in which the connectors are exposed, providing a facility to the CPU board to get connected to a variety of interchangeable add-on modules known as shields. The hardware consists of an open-source hardware board designed around an 8-bit Atmel AVR microcontroller. The software consists of a standard programming language compiler and a boot loader that executes on the microcontroller.

    Read More
  • img
    Embedded System using AVR Microcontroller

    Embedded system is basically a combination of hardware with software. Embedded system basically is a computer system that is designed to pull off a few or one specific function, more often than not in real-time computing constraints. “AVR”enlarged technique of embedded systems. It is an 8-bitRISC single chip microcontroller which was developed in 1996. The AVR was one of the first microcontroller families to use on-chip flash memory for program storage, used by other microcontrollers at the time. It has many enlightening features as there is added an EEPROM to store data over a power off time. An internal oscillator and an internal power on reset make the AVR working without any other components, watchdog.

    Read More
  • img
    Advance Embedded System

    Embedded system is basically a combination of hardware with software. An embedded system basically is a computer system that is designed to pull off a few or one specific function, more often than not in real-time computing constraints. Advance version of combo of two most vetern embedded systems i.e. PIC and 8051 together. They both have various advantages. The PIC is a very general purpose microcontroller with ADC, counter, Built in oscillator with selectable speeds Wide range of interfaces including SPI, USB, USART, AD, programmable comparators, PWM has been used with the advantages of the 8-bit 8051 microcontroller

    Read More

Sign up to GET 10 to 20% Discount

Close
X
Close
X
Close
X
Close