Fill Details

Get free expert guidance within 24 Hours

IOT Based Smart Grid For Centralized Power Measurement & Management System

  • 40% Off
    Project Pack with
    Online / Onsite Training Program
    13000
    7800
    What you will get
  • 40% Off
    Do it Yourself
    Self Learning Pac
    13900
    8340
    What you will get
Project Description

Electricity is available at all places where a human lives and he needs to pay for the amount of electricity consumed. An energy meter is connected to the microcontroller that detects the amount of energy used and then gives that information to the microcontroller. The amount of energy consumed is displayed on the LCD. The value of energy consumed is sent to the internet through a GPRS module that is attached to the microcontroller. GPRS sends the information on the internet by the network of Internet of Things. A bill is automaically generated at the end of the month and the user is informed about the amount and is told to pay the bil on time by notifying it on the webpage.

Modules Used
CU05_img
Microcontroller ATmega8
HMI6_img
Buzzer for Beep Source
HMI3_img
Display Unit (Liquid Crystal Display)
SDU1_img
Relay Driver (Auto Electro Switching) using Optoco
IOTH1_img
Internet Of Things (Hardware Module)
MOD5_img
Energy Metering IC or Module
MOD9_img
GPRS Modem
PS01_img
Regulated Power Supply
IOT_Telemetry_img
Internet Of Things (Telemetry)
IOT_Teleremote_img
Internet Of Things (Teleremote)
Related Training Modules
  • img
    Embedded System using 8051 Microcontroller

    Embedded system is basically a combination of hardware with software. Embedded system basically is a computer system that is designed to pull off a few or one specific function, more often than not in real-time computing constraints. An embedded system is called an embedded system because it is embedded in or is a part of much complex and complete device that comprises hardware, moveable and mechanical parts. They are basically microcontroller to work with ‘applications as a resulted output. A microcontroller is a device with its own memory (RAM, ROM) and many more features added to it such as UART, Interupts and Timer etc, which make it superior to the microprocessors.

    Read More
  • img
    Advance Embedded System

    Embedded system is basically a combination of hardware with software. An embedded system basically is a computer system that is designed to pull off a few or one specific function, more often than not in real-time computing constraints. Advance version of combo of two most vetern embedded systems i.e. PIC and 8051 together. They both have various advantages. The PIC is a very general purpose microcontroller with ADC, counter, Built in oscillator with selectable speeds Wide range of interfaces including SPI, USB, USART, AD, programmable comparators, PWM has been used with the advantages of the 8-bit 8051 microcontroller

    Read More
  • img
    Very Large Scale Integration (VLSI)

    This is a process of stemming or creating integrated circuits by combing several thousands of transistors together on a single chip. VLSI stands for very large scale integration which in short has a purpose of integrating several numbers of semiconductors on a single chip. There are various VLSI technologies used as 45nm, 65nm. They have been named so depending on the length of the gate used in the transistors. A microprocessor is also a VLSI device. Structured VLSI design is a modular methodology originated just with an aim of saving microchip area by minimizing the interconnection area.

    Read More
  • img
    VLSI using CPLD and FPGA

    This is a process of stemming or creating integrated circuits by combing several thousands of transistors together on a single chip. VLSI stands for very large scale integration which in short has a purpose of integrating several numbers of semiconductors on a single chip. There are various VLSI technologies used as 45nm, 65nm. They have been named so depending on the length of the gate used in the transistors. A microprocessor is also a VLSI device. Structured VLSI design is a modular methodology originated just with an aim of saving microchip area by minimizing the interconnection area.

    Read More
  • img
    Industrial Automation

    The word “Industrial automation” implies automatically working organizations, which make use programmable logic controllers (PLC). Process control is a branched statistics and engineering discipline that deals with various controlling methods of output for a specific industrial automated process (architecture, controlling). It was a replacement invented the systems that required numbers of timers; relays etc and increase the cost also. PLCs are a combine package of multiple inputs and outputs, operating under various temperature ranges, even have immunity to noise. As the enhancements made year and year over, sequential relay control, motion control, process control, distributed control systems and networking are included into PLC. The main difference from other computers is that PLCs operate in industrial environments and have multiple (I/O) terminals; those connect the PLC to sensors and actuators. PLCs measure, continuously varied analog input process variables (P, T), and outputs t

    Read More
  • img
    Industrial Automation using PLC, SCADA, HMI and Drives

    The word “Industrial automation” implies automatically working organizations, which make use programmable logic controllers (PLC). Process control is a branched statistics and engineering discipline that deals with various controlling methods of output for a specific industrial automated process (architecture, controlling). It was a replacement invented the systems that required numbers of timers; relays etc and increase the cost also. SCADA is Supervisory Control and Data Acquisition is the systems used to control and Monitor small number of Equipments. They are basically used to perform data collection. It is a collection of HMI (human–machine interface) lock-out tag-out, Remote terminal units, Programmable logic controller, and analytical instrumentation. Various enhancements had been made in the field of SCADA as from 1st generation to 4TH i.e. Monolithic, Distributed, Networked, and Internet of Things.

    Read More
  • img
    PHP Web Development

    PHP is a scripting Language which is used to develop websites.

    Read More
  • img
    Embedded System using ARDUINO

    Embedded system is basically a combination of hardware with software. Embedded system basically is a computer system that is designed to pull off a few or one specific function, more often than not in real-time computing constraints. “ARDUNIO” most widely used technique of embedded systems. An Arduino is an assembled board of Atmel 8-bit AVR microcontroller with additional components to facilitate programming. An important aspect of the Arduino is the standardized way in which the connectors are exposed, providing a facility to the CPU board to get connected to a variety of interchangeable add-on modules known as shields. The hardware consists of an open-source hardware board designed around an 8-bit Atmel AVR microcontroller. The software consists of a standard programming language compiler and a boot loader that executes on the microcontroller.

    Read More
  • img
    Industrial Automation

    The word “Industrial automation” implies automatically working organizations, which make use programmable logic controllers (PLC). Process control is a branched statistics and engineering discipline that deals with various controlling methods of output for a specific industrial automated process (architecture, controlling). It was a replacement invented the systems that required numbers of timers; relays etc and increase the cost also. PLCs are a combine package of multiple inputs and outputs, operating under various temperature ranges, even have immunity to noise. As the enhancements made year and year over, sequential relay control, motion control, process control, distributed control systems and networking are included into PLC. The main difference from other computers is that PLCs operate in industrial environments and have multiple (I/O) terminals; those connect the PLC to sensors and actuators. PLCs measure, continuously varied analog input process variables (P, T), and outputs t

    Read More
  • img
    Embedded System using AVR Microcontroller

    Embedded system is basically a combination of hardware with software. Embedded system basically is a computer system that is designed to pull off a few or one specific function, more often than not in real-time computing constraints. “AVR”enlarged technique of embedded systems. It is an 8-bitRISC single chip microcontroller which was developed in 1996. The AVR was one of the first microcontroller families to use on-chip flash memory for program storage, used by other microcontrollers at the time. It has many enlightening features as there is added an EEPROM to store data over a power off time. An internal oscillator and an internal power on reset make the AVR working without any other components, watchdog.

    Read More
  • img
    Advance Embedded System

    Embedded system is basically a combination of hardware with software. An embedded system basically is a computer system that is designed to pull off a few or one specific function, more often than not in real-time computing constraints. Advance version of combo of two most vetern embedded systems i.e. PIC and 8051 together. They both have various advantages. The PIC is a very general purpose microcontroller with ADC, counter, Built in oscillator with selectable speeds Wide range of interfaces including SPI, USB, USART, AD, programmable comparators, PWM has been used with the advantages of the 8-bit 8051 microcontroller

    Read More
  • img
    Industrial Automation using PLC, SCADA, HMI and Drives

    The word “Industrial automation” implies automatically working organizations, which make use programmable logic controllers (PLC). Process control is a branched statistics and engineering discipline that deals with various controlling methods of output for a specific industrial automated process (architecture, controlling). It was a replacement invented the systems that required numbers of timers; relays etc and increase the cost also. SCADA is Supervisory Control and Data Acquisition is the systems used to control and Monitor small number of Equipments. They are basically used to perform data collection. It is a collection of HMI (human–machine interface) lock-out tag-out, Remote terminal units, Programmable logic controller, and analytical instrumentation. Various enhancements had been made in the field of SCADA as from 1st generation to 4TH i.e. Monolithic, Distributed, Networked, and Internet of Things.

    Read More

Sign up to GET 10 to 20% Discount