The main motive to design this project is to create an automatic system to generate electricity bill. The complete system will keep on monitoring the electric bill and the microcontroller unit will be used to keep record of all the units. As the month will be completed the total units consumed will be calculated and accordingly the bill is auto generated and displayed on LCD also an SMS can be sent to the electricity board as well as consumer describing the amount of the bill. At the end of the month a predefined message send by electricity department to GSM modem attached with energy meter. Then GSM modem connected with meter replied a message which contains total number of unit consumed and calculated amount to the electricity department. If bill will not be paid in a defined period electricity supply will be cut off automatically. This project is very useful to track monthly usage periodically and can prevent from further reduction of the bill.
-
Technologies Covered
Analog & Digital Sensors, Communication, Electrical thesis Projects , Featured Projects, ARM | 8051 | Microcontroller, Security Systems
-
Related Keywords
Data Communication, GSM, SMS Based, GPRS, Energy Meter, Energy Measuring, Energy Tempering, Power Measurement, Power Electronics, SMS, Mobile Controlled, Cell Phone, Security, Communication, Analog Sensors, Microcontroller, Energy Measurement, Current Coil, 8051, 8052, AT89c51, MCS-51, KEIL, Featured Projects, Starred Projects, Exciting Projects, Voice Communication, Electrical, Instrumentation, Power Engineering, Power Generation, Authentication, Identification, Access Control Systems, Digital Sensors, Transducers, Sensing Units
Related Projects
-
Embedded System using 8051 Microcontroller
Embedded system is basically a combination of hardware with software. Embedded system basically is a computer system that is designed to pull off a few or one specific function, more often than not in real-time computing constraints. An embedded system is called an embedded system because it is embedded in or is a part of much complex and complete device that comprises hardware, moveable and mechanical parts. They are basically microcontroller to work with ‘applications as a resulted output. A microcontroller is a device with its own memory (RAM, ROM) and many more features added to it such as UART, Interupts and Timer etc, which make it superior to the microprocessors.
Read More -
Advance Embedded System
Embedded system is basically a combination of hardware with software. An embedded system basically is a computer system that is designed to pull off a few or one specific function, more often than not in real-time computing constraints. Advance version of combo of two most vetern embedded systems i.e. PIC and 8051 together. They both have various advantages. The PIC is a very general purpose microcontroller with ADC, counter, Built in oscillator with selectable speeds Wide range of interfaces including SPI, USB, USART, AD, programmable comparators, PWM has been used with the advantages of the 8-bit 8051 microcontroller
Read More -
Very Large Scale Integration (VLSI)
This is a process of stemming or creating integrated circuits by combing several thousands of transistors together on a single chip. VLSI stands for very large scale integration which in short has a purpose of integrating several numbers of semiconductors on a single chip. There are various VLSI technologies used as 45nm, 65nm. They have been named so depending on the length of the gate used in the transistors. A microprocessor is also a VLSI device. Structured VLSI design is a modular methodology originated just with an aim of saving microchip area by minimizing the interconnection area.
Read More -
VLSI using CPLD and FPGA
This is a process of stemming or creating integrated circuits by combing several thousands of transistors together on a single chip. VLSI stands for very large scale integration which in short has a purpose of integrating several numbers of semiconductors on a single chip. There are various VLSI technologies used as 45nm, 65nm. They have been named so depending on the length of the gate used in the transistors. A microprocessor is also a VLSI device. Structured VLSI design is a modular methodology originated just with an aim of saving microchip area by minimizing the interconnection area.
Read More -
Industrial Automation
The word “Industrial automation” implies automatically working organizations, which make use programmable logic controllers (PLC). Process control is a branched statistics and engineering discipline that deals with various controlling methods of output for a specific industrial automated process (architecture, controlling). It was a replacement invented the systems that required numbers of timers; relays etc and increase the cost also. PLCs are a combine package of multiple inputs and outputs, operating under various temperature ranges, even have immunity to noise. As the enhancements made year and year over, sequential relay control, motion control, process control, distributed control systems and networking are included into PLC. The main difference from other computers is that PLCs operate in industrial environments and have multiple (I/O) terminals; those connect the PLC to sensors and actuators. PLCs measure, continuously varied analog input process variables (P, T), and outputs t
Read More -
Industrial Automation using PLC, SCADA, HMI and Drives
The word “Industrial automation” implies automatically working organizations, which make use programmable logic controllers (PLC). Process control is a branched statistics and engineering discipline that deals with various controlling methods of output for a specific industrial automated process (architecture, controlling). It was a replacement invented the systems that required numbers of timers; relays etc and increase the cost also. SCADA is Supervisory Control and Data Acquisition is the systems used to control and Monitor small number of Equipments. They are basically used to perform data collection. It is a collection of HMI (human–machine interface) lock-out tag-out, Remote terminal units, Programmable logic controller, and analytical instrumentation. Various enhancements had been made in the field of SCADA as from 1st generation to 4TH i.e. Monolithic, Distributed, Networked, and Internet of Things.
Read More -
Industrial Automation
The word “Industrial automation” implies automatically working organizations, which make use programmable logic controllers (PLC). Process control is a branched statistics and engineering discipline that deals with various controlling methods of output for a specific industrial automated process (architecture, controlling). It was a replacement invented the systems that required numbers of timers; relays etc and increase the cost also. PLCs are a combine package of multiple inputs and outputs, operating under various temperature ranges, even have immunity to noise. As the enhancements made year and year over, sequential relay control, motion control, process control, distributed control systems and networking are included into PLC. The main difference from other computers is that PLCs operate in industrial environments and have multiple (I/O) terminals; those connect the PLC to sensors and actuators. PLCs measure, continuously varied analog input process variables (P, T), and outputs t
Read More -
Industrial Automation using PLC, SCADA, HMI and Drives
The word “Industrial automation” implies automatically working organizations, which make use programmable logic controllers (PLC). Process control is a branched statistics and engineering discipline that deals with various controlling methods of output for a specific industrial automated process (architecture, controlling). It was a replacement invented the systems that required numbers of timers; relays etc and increase the cost also. SCADA is Supervisory Control and Data Acquisition is the systems used to control and Monitor small number of Equipments. They are basically used to perform data collection. It is a collection of HMI (human–machine interface) lock-out tag-out, Remote terminal units, Programmable logic controller, and analytical instrumentation. Various enhancements had been made in the field of SCADA as from 1st generation to 4TH i.e. Monolithic, Distributed, Networked, and Internet of Things.
Read More